Ball – 14 Ga. aluminum with a flush seam. Gold Anodized furnished unless otherwise specified or choose Clear Anodized (Silver) or finished to match shaft.

Truck – heavy-duty, external halyard, non-fouling, revolving-type with 26 stainless steel ball bearings. Finished to match shaft.

Halyard – standard equipment includes one waterproof, mildew and U.V. resistant nylon halyard with wire center. Choose: White, Silver, Black or Brown to match shaft.

Cleat – heavy-duty cast aluminum finished to match shaft. Secured with two stainless steel, flat-head, tamper-proof machine screws.

Collar – ornamental base or flash collar of spun aluminum with a diameter of at least 1ý larger than foundation sleeve.

Foundation Sleeve – 16 Ga. corrugated steel tubing with lighting spike, base plate, support plate and centering wedges. Above fittings are included as standard equipment on all Diminishing Section Flagpoles with External Halyards. As with all of our Flagpole lines, optional accessories are available.

Finish – all of our Steel Flagpoles are mechanically cleaned and chemically etched to provide a smooth surface. Two coats of two-part polyurethane primer are applied before application of two polyurethane finish coats. Specify custom or one of these standard colors: Aluminum (Silver), Light Bronze, Medium Bronze, Dark Bronze, Black or White.

Ball (optional) – 14 Ga. aluminum with flush seam. Choose Gold Anodized, Clear Anodized (Silver) or painted to match shaft.

Truck – heavy-duty, internal halyard revolving-type with 26 stainless steel ball bearings. Finished to match shaft.

Halyard – standard equipment includes one stainless steel aircraft cable complete with proper size flag arrangement, shock spring, counterweight, beaded retainer ring and flag snaps.

Winch – new, improved winch, mounted inside shaft, is operable only by a removable crank handle. Gearless and self-locking at any point, it eliminates the need for a separate brake. New direct-drive permits rapid raising and lowering of flag with little effort. As stainless steel cable unwinds from winch, it passes up through the shaft, over truck sheave to the outside of the shaft where retainer sling provides a sliding anchor. Counterweight, heavily coated with neoprene, attached to retainer sling, allows halyard to be lowered for fastening or removing flag. Then, halyard is raised completely out of reach of vandals.

Collar – ornamental base or flash collar is spun aluminum, with a diameter of at least 1" larger than foundation sleeve. Above fittings are included as standard equipment on all of our Sectional Flagpoles with Internal Halyards. As with all of our Flagpole lines, optional accessories are available.

Recommendation: flagpoles above 100´ exposed height should be equipped with an internal halyard system to aid in raising and lowering larger flags.