Can't find the flag you need? Let us help!
We have over 27,000 products including: flags, banners and poles ready to ship directly to you. If you can't find the product that you want, pleasee-mailor call (262) 783-4800 x14, and let us know what you are looking for. Requests made during normal business hours are responded to immediately!
Always fly a fresh flag with our VIP Service!
We want to make your life just a bit easier and pleasant. Sign up for our VIP Service and we will automatically ship flags to any location based on your needs and weather conditions. Fresh flags tell your visitors you care. For details and to sign up click and relax!
OUR BBB MEMBERSHIP
Proud Members of the Better Business Bureau
Click on this link to log into our information on file with the Better Business Bureau.
Official Half-Staff Proclamations from the President of the United States of America Click Here to see dates & information about when to fly your flag at half staff!
This Internal Halyard Cap Style Flagpole Truck is constructed of aluminum for use on rope style halyard flagpoles. A small pulley assembly is added to the inside of a standard outrigger style truck to allow the halyard to feed from inside the flagpole. The pulley assembly has a 1 7/16" outside diameter cast nylon pulley on a 1/4" stainless steel axle and is held in place inside the truck by a 5/16"18 NC stainless steel set screw. The truck has a 2" outside diameter cast nylon pulley on a 1/4" stainless steel axle and is designed to slip over the top of the flagpole and be secured with three 5/16"-18 NC stainless steel set screws. The top of the truck will accept an ornament with 1/2"-13 NC threading as standard but can be supplied with other sizes of threading. The ornament is held in place by a size 10-32 stainless steel pan head screw. Recommended maximum rope diameter is 5/16".
Silver
Bronze
Fits Pole Dia.
Item #
1-5
6+
Add to Cart
Item #
1-5
6+
Add to Cart
3"
340178
$44.00
$40.00
340180
$49.00
$44.00
3 1/2"
340179
$60.00
$54.00
340181
$66.00
$60.00
White
Black
Fits Pole Dia.
Item #
1-5
6+
Add to Cart
Item #
1-5
6+
Add to Cart
3"
340182
$49.00
$44.00
340184
$49.00
$44.00
3 1/2"
340183
$66.00
$60.00
340185
$66.00
$60.00
Threaded Style
IH-2 Series
STATIONARY - SINGLE PULLEY
All of these cast aluminum trucks have a 1 1/4 NPT threaded spindle which screws into the top of teh flagpole where a female fitting has been installed. The top of all trucks are designed to accept an ornament with a spindle threading of 1/2"-13 NC as standard but can be supplied in other sizes of threading. The ornament is secured to the truck with a 1/4"-20 NC stainless steel set screw. The extra large model has stainless steel sealed lubricant bearing assemblies while all other sizes utilize stainless steel ball bearings in both upper & lower bearing races. All sizes except the small model are supplied with a stainless steel bushing at the cable exit point. For added strength the extra large truck is supplied with a cast bronze spindle; all other sizes are supplied with a cast aluminum spindle.
Silver
Bronze
Base Dia. of Truck
Ht. of Truck
Max. Pole Top Dia.
Item #
1-5
6+
Add to Cart
Item #
1-5
6+
Add to Cart
5"
4 1/2"
3"
340-194
$144.00
$130.00
340-198
$158.00
$142.00
6 1/2"
6 1/2"
4"
340-195
$220.00
$200.00
340-199
$240.00
$216.00
7 1/2"
7 1/4"
5"
340-196
$264.00
$238.00
340-200
$290.00
$260.00
10 1/2"
8 1/2"
7 1/2"
340-197
$540.00
$486.00
340-201
$590.00
$530.00
White
Black
Base Dia. of Truck
Ht. of Truck
Max. Pole Top Dia.
Item #
1-5
6+
Add to Cart
Item #
1-5
6+
Add to Cart
5"
4 1/2"
3"
340-206
$158.00
$142.00
340-210
$158.00
$142.00
6 1/2"
6 1/2"
4"
340-207
$240.00
$216.00
340-211
$240.00
$216.00
7 1/2"
7 1/4"
5"
340-208
$290.00
$260.00
340-212
$290.00
$260.00
10 1/2"
8 1/2"
7 1/2"
340-209
$590.00
$530.00
340-213
$590.00
$530.00
Fiberglass IH Series
STATIONARY - DOUBLE PULLEY
Molded fiberglass construction with a 1 1 /2" outside diameter nylon pulley. This stationary truck is designed to be used on flagpoles that have up to a 3 1/4" outside top diameter with female fitting installed. The spindle has 1 1/4" NPT threading and is screwed into the top of the flagpole. The spindle is hollow allowing the halyard to feed from inside the flagpole. The top of the truck will accept an ornament with a spindle threading of 1/2"-13 NC as standard but can be supplied with other sizes of threading. The recommended maximum halyard diameter is 5/16".
White
Bronze
Item #
1-5
6+
Add to Cart
Item #
1-5
6+
Add to Cart
340232
$70.00
$63.00
340233
$74.00
$67.00
American Flags Express
12577 W. Custer Avenue
Butler, WI 53007
Hours: 9am - 5:30pm M-F CST1.262.783.4800 Order By Phone
1.262.783.5645 Order By Fax
Shipping Normally $6.95 Click Here for Details
PROMOTIONAL FLAGS
Promotional/Realtor, Safety Flags -Pennants
-Hula Streamers
-Message Flags
-Safety Flags
-Corporate Flags Click Here for Details.
FLAG SETS
American Freedom Flag Set (Available with & w/out Flag)
The ultimate problem-free flagpole set. Resists flag wrapping around its pole better than any other set because the pole rotates in a precision bearing bracket. Simply our best flag set! Click here for details.
FLAGPOLES
Home-steader Flagpole (Flag Not Included)
• Our best ground set flag-pole that can ship UPS.
• Available in 4 popular residential heights.
• Perfect for long-lasting residential use
State & Territory Flags Unsurpassed in beauty and craftsmanship, these state and territory flags are manufactured to precise specifications. Buy one today!
This Internal Halyard Cap Style Flagpole Truck is constructed of aluminum for use on rope style halyard flagpoles. A small pulley assembly is added to the inside of a standard outrigger style truck to allow the halyard to feed from inside the flagpole. The pulley assembly has a 1 7/16" outside diameter cast nylon pulley on a 1/4" stainless steel axle and is held in place inside the truck by a 5/16"18 NC stainless steel set screw. The truck has a 2" outside diameter cast nylon pulley on a 1/4" stainless steel axle and is designed to slip over the top of the flagpole and be secured with three 5/16"-18 NC stainless steel set screws. The top of the truck will accept an ornament with 1/2"-13 NC threading as standard but can be supplied with other sizes of threading. The ornament is held in place by a size 10-32 stainless steel pan head screw. Recommended maximum rope diameter is 5/16".
All of these cast aluminum trucks have a 1 1/4 NPT threaded spindle which screws into the top of teh flagpole where a female fitting has been installed. The top of all trucks are designed to accept an ornament with a spindle threading of 1/2"-13 NC as standard but can be supplied in other sizes of threading. The ornament is secured to the truck with a 1/4"-20 NC stainless steel set screw. The extra large model has stainless steel sealed lubricant bearing assemblies while all other sizes utilize stainless steel ball bearings in both upper & lower bearing races. All sizes except the small model are supplied with a stainless steel bushing at the cable exit point. For added strength the extra large truck is supplied with a cast bronze spindle; all other sizes are supplied with a cast aluminum spindle.
Molded fiberglass construction with a 1 1 /2" outside diameter nylon pulley. This stationary truck is designed to be used on flagpoles that have up to a 3 1/4" outside top diameter with female fitting installed. The spindle has 1 1/4" NPT threading and is screwed into the top of the flagpole. The spindle is hollow allowing the halyard to feed from inside the flagpole. The top of the truck will accept an ornament with a spindle threading of 1/2"-13 NC as standard but can be supplied with other sizes of threading. The recommended maximum halyard diameter is 5/16". 
